均衡聚类市场拍卖机制的异构无人机集群任务规划方法

针对大规模异构无人机集群的全局任务规划问题,提出一种基于均衡聚类市场拍卖机制的任务规划方法。对无人机群协同合作完成任务的场景进行分析,综合任务聚类和无人机联盟的优势,建立了通用性较高的任务规划模型。考虑到对无人机群负载均衡的需求,融合和改进了K-means聚类算法和市场拍卖机制,形成一种综合考虑路程消耗和任务消耗的均衡聚类市场拍卖算法。在拍卖过程中引入平衡参数,通过计算旅行商问题来修正平衡参数,保证无人机群在负载均衡的同时整体成本不断降低。仿真结果表明,使用均衡聚类市场拍卖机制的任务规划方法能够在较短时间内完成异构无人机群的复杂任务规划,保证无人机群负载均衡的同时,整体成本和总时间上也有较好表现,具有一定的实际应用价值。     

文娱领域综合治理语境下高校艺术学科教师评价与考核机制建设的相关问题研究

文娱领域综合治理是当下的文化热点,但与之相关的高校艺术学科教师的评价与考核机制建设却一直是被学术界忽略的问题。该问题不仅关乎高校教师评价与考核工作的整体进程、艺术学科的健康发展,还关乎国家文艺创作队伍的建设、文娱行业的天清气朗。本文认为艺术学科教师评价与考核机制是决定文娱领域艺人违法失德乱象的重要要素之一,科学、系统、规范的评价与考核机制有利于这一问题的解决。     

The surface activation of boron to improve ignition and combustion characteristic

Boron is a very promising and highly attractive fuel because of high calorific value. However, the practical applications in explosives and propellants of boron have been limited by long ignition delay time and low combustion efficiency. Herein, nano-Al and graphene fluoride (GF) as surface activated materials are employed to coat boron (B) particles to improve ignition and combustion performance. The reaction heat of nano-Al coated B/KNO₃ and GF coated B/KNO₃ are 1116.83 J/g and 862.69 J/g, respectively, which are higher than that of pure B/KNO₃ (823.39 J/g). The ignition delay time of B/KNO₃ could be reduced through nano-Al coating. The shortest ignition delay time is only 75 ms for B coated with nano-Al of 8 wt%, which is much shorter than that of pure B/KNO₃ (109 ms). However, the ignition delay time of B/KNO₃ coated with GF has been increased from 109 to 187 ms. B coated with GF and nano-Al shown significantly influence on the pressure output and flame structure of B/KNO₃. Furthermore, the effects of B/O ratios on the pressure output and ignition delay time have been further fully studied. For B/KNO₃ coated with nano-Al and GF, the highest pressures are 88 KPa and 59 KPa for B/O ratio of 4:6, and the minimum ignition delay time are 94 ms and 148 ms for B/O ratio of 7:3. Based on the above results, the reaction process of boron coated with GF and nano-Al has been proposed to understand combustion mechanism.     

间瞄武器模拟终端火力裁决概率问题研究

在信息主导,火力主战的背景下,间瞄火力的效能发挥对战争的胜负起着至关重要的作用。而实兵对抗训练中,间瞄火力打击效能的评估一直以来缺乏有效的理论依据,影响间瞄火力裁决的科学决策。文章结合间瞄武器模拟终端的使用,根据间瞄火炮打击的特点规律,用面火力射击数学模型推导出间瞄火炮射击的毁伤概率公式,该公式可以为间瞄武器模拟终端的火力毁伤概率的确定提供理论依据。     

目标毁伤效果评估技术研究进展

目标毁伤效果评估作为目标保障的一项重要内容,对精确打击作战情报保障起到了核心作用,是现代精确打击体系的一个重要环节和关键步骤。文章从评估方法、评估模型和评估系统三个方面入手,梳理了国内外目标毁伤效果评估技术的最新研究进展,并对目前各类评估方法、模型及系统的优缺点分别进行了评述。最后,指出了该领域今后的研究方向。     

基于能源互联网背景的储能二次电池技术发展分析

能源互联网是在现有配电网基础上,融合新能源技术和互联网技术,将分布式能源采集装置和分布式能源储存装置联合发展起来的新技术,对于优化能源结构和提高能源利用具有重要的意义。文章以能源互联网对储能电池的需求为背景,首先归纳了能源互联网对于储能电池的要求,在此基础上重点分析了多种可应用于能源互联网的储能电池的性能与特点,并对其未来发展趋势进行了展望。     

中段反导指挥控制能力生成机理及构成分析

提出了中段反导指挥控制能力生成的要素基础建设机理、要素集成聚优机理和要素联动涌效机理,构建了中段反导指挥控制能力总体构成框架,并对作战能力具体构成进行了分析,可为反导指挥控制系统建设及作战效能评估提供借鉴。     

Damage visualization and deformation measurement in glass laminates during projectile penetration

Transparent armor consists of glass-polymer laminates in most cases. The formation and propagation of damage in the different glass layers has a strong influence on the ballistic resistance of such laminates. In order to clarify the course of events during projectile penetration, an experimental technique was developed, which allows visualizing the onset and propagation of damage in each single layer of the laminate. A telecentric objective lens was used together with a microsecond video camera that allows recording 100 frames at a maximum rate of 1 MHz in a backlit photography set-up. With this technique, the damage evolution could be visualized in glass laminates consisting of four glass layers with lateral dimensions 500 mm × 500 mm. Damage evolution was recorded during penetration of 7.62 mm AP projectiles with tungsten carbide core and a total mass of 11.1 g in the impact velocity range from 800 to 880 m/s. In order to measure the deformation of single glass plates within the laminates, a piece of reflecting tape was attached to the corresponding glass plate, and photonic Doppler velocimetry (PDV) was applied. With the photonic Doppler velocimeter, an infrared laser is used to illuminate an object to be measured and the Doppler-shifted light is superimposed to a reference light beam at the detector. The simultaneous visualization and PDV measurement of the glass deformation allow determining the deformation at the time of the onset of fracture. The analysis of the experimental data was supported by numerical simulations, using the AUTODYN commercial hydro-code.     

切向空气气流对激光辐照碳纤维复合材料的影响

实验研究了靶材表面存在和不存在切向空气气流时,975nm连续激光对碳纤维增强树脂基复合材料的辐照效应,发现切向气流的加载有利于激光对碳纤维复合材料的破坏.从理论上对激光辐照下碳纤维复合材料的破坏机理进行了初步分析,基于碳的氧化特性和氧化反应机理,推导了碳纤维的氧化速率方程.采用改进的光滑粒子方法,对激光辐照下复合材料树...     

基于敏感性分析和准稳态假设简化详细反应机理

发展了一套基于敏感性分析和准稳态假设来简化复杂化学动力学机理系统的方法。采用等压均相反应器燃烧模型和详细化学动力学机理计算特定工况下的自燃过程。通过对详细机理计算结果的敏感性分析后删除其中的冗余组分和冗余反应,简化得到基干反应模型。再找出基干机理中反应速率较快,浓度较低的组分假定为稳态组分,使用准稳态假设方法简化得到总包反应模型。最后以甲烷燃烧的GriMech1.2详细机理为例分析得到了简化机理并计算了着火延迟时间,与详细机理所得的结果进行比较验证,得到了较好的结果。